selling point
All-in-one all-inclusive design, fit to protect the camera;
Three-point locking, stable and non-deflecting: locked by 1/4"-20 screws at the bottom and double-sided pressure blocks;
Built-in multiple expansion ports such as 1/4"-20 threaded holes, 3/8"-16 threaded holes, Alai positioning holes, cold shoes, etc., to achieve multi-scene shooting;
The bottom of the Akka quick-fit, can be directly installed to the Akka tripod and DJI RS 2/RSC 2 stabilizer;
SmallRig FUJIFILM X-H2S Multi-function Expansion Frame (Battery Grip) 3933 is designed to provide camera protection and a variety of expansion ports. The expansion frame is locked and fixed by a 1/4"-20 screw at the bottom and a double-sided pressure block. There are many built-in silicone gaskets to prevent scratching the camera. The expansion frame does not interfere with the body buttons, card slots, battery compartment and flip screen. The use of other interfaces. The expansion frame has built-in multiple 1/4"-20 threaded holes, 3/8"-16 threaded holes, which can expand the upper handle 2165 and 1638 of the auxiliary mirror movement, and the side handle 2093 and 2425. The HDMI cable can be expanded. Clamp 1693 to ensure the stability of signal transmission, and can also expand monitor brackets 2903, 2904, magic hand 2115; built-in 2 cold shoe interfaces, can install microphones, fill lights and other equipment; built-in Aka quick installation at the bottom, can be directly installed It can be installed on Akka tripod and DJI RS 2/RSC 2 gimbal to realize quick switching between handheld, gimbal and tripod. Two 1/4"-20 threaded holes are built in the front, which is compatible with double-hole pipe clamp 942. Expansion shading bucket 3196, lens support 2152 and other accessories; a 1/4"-20 threaded positioning hole is built in the front, which is compatible with single-hole pipe clamp 3276, and can be expanded with follow focus 3010. In addition, a double-ended wrench is built in the bottom of the expansion frame, which is convenient for disassembly.
Precautions:
Installation sequence: Please install the bottom 1/4"-20 screw first, and then install the double-sided pressure block.
adaptability
FUJIFILM X-H2S Compatible FT-XH Battery Grip
FUJIFILM X-H2S Compatible VG-XH Battery Grip
