Specification:
Precise output displayed on LED panel, 20 steps from to 3.0 in 0.1 increments
Use optional FT-16 trigger to control the flash power ratio, modeling lamp and buzzer, as well as flash triggering
150W modeling lamp adjusts in 9 power levels
Outstanding output stability, no more than 2% shifts when under the same output
Anti-preflash function enables synchronization with cameras that have a one-preflash firing system
Auto memory and recovery of adjusted panel settings
Model: E-300
Max Power (WS): 300Ws
Guide No. (m ISO 100): 58
Color Temperature: 5600±200K
Operating Voltage: AC100-120V/60HZ Or AC200-240V/50HZ
Power Output Control: OFF, 5.0-7.0(1/16-1/1)
Modeling Lamp Level: 9 Levels
Modeling Lamp (W): 75W
Recycle Time: 0.4-2.5S
Triggering Mode: Sync cord, Test button, Slave triggering, Wireless control port
Flash Duration: 1/2000 to 1/800 second
Fuse: 5A
Dimension: Length: 21cm; Width: 11cm; High(without handle): 11cm; Cable Length: 488cm; Flash Diameter: 9.5cm Dimension(with original box): 24.5*18*13cm
Weight: 1757g
Operation:
Attach the flash units on an appropriate light stand. Adjust the mounting bracket for a good angle and make sure it is tightened and fixed. Use the direction adjusting handle to adjust the flash to a desired direction. Umbrella input is for different photo umbrellas to put in.
Package included:
1 x Studio Flash
1 x Modeling Lamp
1 x Power Cord
1 x Instruction Manual
Pay attention to Do not include Do not include Flash Trigger
